18.01.2019, Infineon Campeon, Neubiberg Germany

Martin Barth, Body Application Specialist for IFAG Automotive Division, presenting the highlights of 3Ccar and the result of SC9, a Smart LIN HVAC system.

The presentation included a live demonstration and was surrounded by an active discussion amongst IFAG technical experts.

On the 8th – 10th of October 2018, 3Ccar partners met for the final project review meeting in Graz, Austria. The meeting was attended by all project partners, project officers, as well as representatives from ECSEL JU, and national and local governments.


Discussions at the TU Graz

Leaders of all of the project Supply Chains and Work Packages presented the achieved results, deliverables, and milestones at the TU Graz. Plans for the valorization of the 3Ccar technological results were discussed, paving the way for impactful market introductions. Furthermore, project partners presented how the developments achieved under 3Ccar will be integrated into future collaborations, and how they will impact the future of mobility and European economies.




The final review meeting culminated with a session of project technological demonstrators during the networking event ECA2030 Graz, held at the Hans-List Hall in Graz: Electric Connected Automated Cars invented for the 2030 Consumer. The outstanding event, as highlight of ECSEL JU project’s 3Ccar final review days, was organized by AVL LIST, Graz. During this event, Dr. Sabine Herlitschka, Chair of ECSEL Joint Undertaking Governing Board, CEO and CTO of Infineon Technologies Austria, gave an inspirational keynote speech presenting the vast achievements of ECSEL JU projects and encouraging future collaborations.

Demonstrator Session at the Hans List Hall

Event attendees were warmly welcomed by event hosts Prof. Georg List, AVL List GmbH VP Corporate Strategy, and Prof. Helmut List, AVL List GmbH CEO, and inspired by their visionary talks. A cordial reception was also extended by Mag. Alexandra Pichler-Jessenko, Member of Styrian Parliament, who captivated the audience with her speech about the host city and the importance of innovation-oriented economy. Dr. Anton Chichkov then presented his speech on the Mobility.E lighthouse initiative, driven by the cluster project AutoDrive. ECA2030 Graz participants were also honoured by the presence of Mag. Diana Materi from Townhall Graz, Mr Reinhold Friedrichs, BMBF Federal Ministry of Education and Research of Germany, and Mr Francis Deprez, VLAIO Agency for Innovation and Entrepreneurship, IWT-Vlaanderen.

Following the speeches, ECA2030 Graz participants had the opportunity to familiarize themselves with the numerous 3Ccar technological demonstrators and the impressive ANTARES E2aircraft, presented by Lange Aviation.

3Ccar coordinator Reiner John thanked all 3Ccar partners, industry and public representatives, as well as the funding agencies, for this extraordinary opportunity to collaborate in creating novel, integrated components for complexity control and more affordable vehicles.

Get some more inspirations of the ECA2030 event and 3Ccar final review


During the final review of 3Ccar the third ECA2030 event will be held, bringing together a large number of stakeholders and initiating discussions in an exhibition space of project’s technical demonstrators. The event will take place in Graz on 09.10.2018 at 16:30 – 18:30 in the Hans-List Center.

We will share results about translated complexity of today’s cars into semiconductors and discuss the major results seen in demonstrations, as well as discuss about changing the mind-set in terms of the safety requirements of highly automated in order to discuss the next evolution cycles, technology gaps and limits of today´s technologies to pave the way for the electric, connected, automated car for the 2030 customer (ECA-cars).

Background for the Mobility.E light house and the networking events ECA2030

  • In 2030, the electric, connected and automated car will become mainstream. On a global scale, today´s yearly manufacturing volume of more than 80 Mio conventional cars will contain a share of estimated 40 Mio ECA-cars in 2030, which have to be produced in a sustainable way.
  • As a consequence of this disruptive change, we need to define not only the needed technology basis, but also to identify possible gaps to gain and keep the sovereignty and the IP to build our cars in and for Europe. 
  • ECA2030 is especially driven along the ECS value chain by research topics based on semiconductors, embedded control, seamless communication, advanced algorithms and system integration including the needed materials. Key migration parameter, the DNA of the technologies, must be defined for the next evolution cycles.

Demonstration of novel System on Chip developed by Infineon for bipolar and three phase stepper motor control with the implemented micro-stepping motor control algorithms for drive noise reduction, equipped with new stall detection algorithm and LIN auto addressing functionality provided by BUT

2018 09 5-6 in Dresden


ECSEL in Germany Congress was held in Dresden, and 3Ccar was presented together with the Umbrella projects at the event.  More than 170 experts gathered to discuss their experiences and future expectations regarding ECSEL JU (the “Electronic Components and Systems for European Leadership” Joint Undertaking), the most important European co-financing initiative for the key and cross-sectorial technology of microelectronics.
In the first photo from the event - "Microelectronics enlightens Germany": The Saxon Prime Minister Michael Kretschmer, the Parliamentary State Secretary in the BMBF Michael Meister, together with the CEO of Infineon Technologies AG, Reinhard Ploss, and an LED wall that illuminates all locations of German ECSEL projects.

2018 07 05-06 in Turin, Italy


3Ccar consortium continues with the chain of ECA2030: Electric Connected Automated Cars Invented for the 2030 Customer events and workshops, and this time the ECA2030 workshop took plane in Turin. The event was coorganised with the project SilverStream, which provided their car demonstrator at the event workshop in Polytechnic University of Turin. The event was attended by a number of stakeholders, including public authorities and dr. Paola Pisano, the Deputy Major of the City of Turin and Assessor for Innovation.

04.07.2018, AdvanTec GmbH

The hybrid propulsion system by Advantec, using AURIX™ as high safety controller.

First run of all components of the hybrid propulsion system developed by Advantec for a motor glider. They developped a testbench to run all elements, before integrating in the real airplane.

On the 2. testrun Advantec were using an Infineon Aurix board to start and control the range-extender, also showing the most important parameters delivered by the range-extender on the board´s display.

The next step to run the system is in a scenario as follows


  • Start of the system by a hardware switch, activating the primary propulsion system, starting of the electric motor by the hand-throttle only using the batteries energy


  • After using the battarie down to 80% capacity, automated start of the REX steered by the Aurix controller with a power of max 12kW over 10 minutes duration in different power settings


  • Stopping of the primary propulsion system with a synchronus shutdown of the REX

19-20th June 2018 Brussels, Belgium

3Ccar and AutoDrive projects were presented during the ECSEL JU Symposium 2018 ‘Shaping digital innovation’ at the common project booth with four technology demonstrators: 3Ccar Motor, Inverter, Harvester, and 3D MEMS Laser Scanner. The Symposium took place in Brussels, Belgium on the 19-20 of June 2018 and gathered a wide range of European and global stakeholders in the Electronics Components and Systems field, including industry, research and financial communities, policy decision-makers, and key opinion leaders.

ECA2030, 4th - 5th Jul 2018 Italy - Turin


Please find here the Registration-Form for the ECA3020 Event in Turin.

For people interested only in technical sessions, the registration is required but the participation is free of charge. For any question concerning ECA 2030 Turin event and the registration process please contact Mariangela Saracco ()

In July 2018 the ECA 2030 TURIN Event takes place at Polito Turin. Further notification about the registration procedure will follow soon. Please reserve the dates in your calendars; we´re looking forward to an active participation!

ECA2030 is the interactive arena where the automotive community and policy makers meet and discuss about the next evolution cycles, technology gaps and limits of today ́s technologies in order to pave the way for the Electric, Connected, Automated car for the 2030 customer (ECA-cars).

5 - 7th December 2017, Brussles - Belgium


3ccar and Autodrive received the 1st Place Award at EFECS 2017 the second year in a row. The EFECS 2017, themed ‘Our Digital Future’, is a brand-new
international forum supporting the Electronic Components and Systems (ECS) value chain in Europe. The European Forum for Electronic Components and Systems 2017 (EFECS)
is abrand new event and a successor to the European Nanoelectronics Forum & the ARTEMIS technology Conference. It is jointly organised by the European Commission (DG CONNECT),
the industry associations AENEAS, ARTEMIS-IA and EPoSS and the ECSEL Joint Undertaking.


6th - 8th November 2017, Tampere Finland